listen to this article :
dry stone retaining wall cost is one of the materials used both in the exterior and interior of the building. This material has a unique durability and beauty and is one of the most popular building materials due to the lack of maintenance costs.
What is the cheapest dry stone retaining wall cost
The stone is installed on the facade of the building in two Cost to Build Retaining Wall: wet (with mortar) and dry (without mortar). The dry installation method, also known as the mechanical installation method, is performed using a metal bolt and nut. In this method, mortar and cement are not used, but the stone is installed on the facade wall of the building using metal bolts and nuts. In the dry installation method, the stone used for the facade of the building must be thick, because in this method, it is necessary to drill a hole in the stone, and if the stone does not have a suitable thickness, it will crack. However, dry stone facade installation has advantages that make this method superior to other methods.
Advantages of installing dry stone facade: Dry facade installation is a completely safe and common method. In this method, unlike the wet method (with mortar), there is an empty space between the wall and the facade stone, which prevents the cracking and breaking of the facade stone in case of climate change. If in the method of installing the facade stone with mortar, the space between the wall and the stone is completely filled with mortar and the stone adheres to the wall, and if the stone shrinks and expands, the probability of cracking and breaking it is very high. In dry stone facade installation, an empty space of approximately 30 to 45 mm is located between the outer wall of the wall and the facade stone, which leads to an air layer between the wall and the facade stone and acts as thermal insulation. The dry installation of the facade stone helps us to create a complete and perfect view and has the desired beauty in the fastest possible time.
Complete dry stone retaining wall cost newest list
Disadvantages of Retaining Wall Cost Guide installation method: In dry stone facade installation, due to stone piercing, there is a possibility of cracking or breaking the stone during this operation. Therefore, performing this method requires special skill and attention. This is because improper drilling of the facade stone can lead to the destruction of the stone. Although dry stone installation prevents cracks and fractures after installing the stone, the stone will be damaged during installation if there is not enough precision and skill. Therefore, this method requires skilled and at the same time expensive labor and will increase the installation cost slightly.
The second stage is the preparation of the wall surface on which the facade is executed. The entire surface of the wall should be clean and there should be no dirt or plaster on it. If the wall is newly built, you should make sure that the wall is dry and the surface is hard so that the pin stays firmly in the hole created on the wall. Pin is unlikely to come.
The final and main stage is the installation of the stone. The exact location of the hole on the stone and the wall is determined. You can start drilling holes in the left or right corner of the wall. The size of these holes should be at least 2 mm and its depth and thickness should be appropriate according to the size of the clamp. The bolts are placed on the wall at an angle to the hole created in the facade stone and fastened to the stone, so that there is at least 2 mm of empty space between the installed stones and the wall, and thus the entire wall is covered.
The first step is to prepare the right materials. In dry stone installation, facade stone requires pins and pins. Clamps and pins are available in different sizes and types. Depending on which type is used, its dimensions will also vary. Care must be taken to use a steel and stainless steel fastener.
You can contact us to buy and sell these products:
Types and examples of curtain wall construction and execution Building Facade|facade engineering|facade materials Ceramics Facades|Handrails|Terracotta Facade|Thermowood WPC Wood Plastic|facades glass|dryfacade (Aluminum Louvers) Detailed technical and executive information for those interested
Also, Here are some of the capabilities of this company:
Valid Aluminium Company site
aluminum company producer
factory in Manufacture aluminum profile windows & door aluminum
Details of the Valid Aluminium Company of factory products
Curtain Wall|Frameless glass facade|Aluminum louver Skylight glass|Dry ceramic|Dry stone|aluminum profile Glass Aluminum handrails|Composite sheet|Wood-plastic(WPC) Spider|Facade Design & Concept Engineering Interior Design
Leave A Comment